ZIAX Zinc Alloy Bathroom Angle Valve | Precise Flow Control · Durable & Leak - Proof

ZIAX Zinc Alloy Bathroom Angle Valve | Precise Flow Control · Durable & Leak - Proof
Product Introduction:
1.Core Purpose Designed for bathroom water systems, suitable for water inlet control of toilets, washbasins, etc. 2. Material Performance Made of high - quality zinc alloy, with high strength, compression and corrosion resistance, stable for long - term use. 3.Convenience Advantage Standard threaded interface, easy to install without complex tools, done by hand or simple wrench. 4. Safety Guarantee Multiple sealing processes for leak - proof; built - in precision valve core for accurate water flow control. 5. Easy Maintenance Wipe quarterly for maintenance; solve stuck switch by cleaning or replacing valve core, with after - sales support.
Send Inquiry
Add To Inquiry
Description
Technical Parameters

Product Description

 

ZIAX Zinc Alloy Angle Valve ZN - 0001 is designed for bathroom water - way systems. Made of high - quality zinc alloy material, crafted through precision die - casting and surface treatment processes, it is suitable for water inlet control of toilets, washbasins and other bathroom equipment, ensuring bathroom water safety and convenience with reliable performance and practical design.

 

 

Product Parameters

 

product-1280-1280
 
product-1280-1280
 
product-1280-1280
Model number ZN-0001
Material Zinc

Type

Valve,accessory

 

Core Advantages

Advantage display

product-1280-1280

1

 

High - Strength & Durable Material

The zinc alloy base material has high hardness, excellent compression and corrosion resistance. There is no rust or deformation on the surface, and it is stable and reliable for long - term use.

product-1280-1280

2

 

Precise Water - Way Control

Built - in precision valve core, smooth switching without resistance, can accurately adjust water flow, easily meeting daily water use and equipment maintenance water cutoff needs.

product-1280-1280

3

 

Convenient Installation Design:

Standardized threaded interface (complying with industry general specifications), suitable for most bathroom water inlet hoses, no need for complex tools, can be installed by hand or with a simple wrench.

product-1280-1280

4

 

Safe Leak - Proof Guarantee

The sealing rubber ring fits tightly with the valve body, combined with multiple sealing processes, effectively avoiding water leakage risks.

 
 

Certifications

 

BSCI ,ISO ,SABER , CE ,ROSH SVHC

toilet cover black
toilet cushion
 

Damper certification

 

Installation & Maintenance

Technology First

We offer a variety of transmission components

Installation Steps:

 

Close the main water valve in the area where the equipment to be connected is located, and drain the remaining water in the pipeline.

Align the threaded end of the angle valve with the wall/ground water pipe interface, and rotate clockwise to tighten (it is recommended to use thread seal tape for sealing to enhance leak - proof performance ).

Connect the other end to the bathroom equipment water inlet hose, lightly screw until it fits, and then use a wrench to moderately reinforce.

Open the main water valve, check for leakage at the interface, and complete the installation if normal.

Maintenance Tips:

 

Wipe the surface of the angle valve with a soft cloth every quarter to remove water stains and dirt, maintaining appearance and performance.

If the switch is stuck, close the water valve, lightly rotate the valve core to clean impurities, or contact after - sales to replace the valve core.

 

FAQ 

 

Q1: There is water leakage after the angle valve is installed. What is the reason?
A1: It may be that the sealing rubber ring is not installed properly or the thread is not sealed well. You can close the water valve, re - adjust the position of the rubber ring, or supplement the thread seal tape and then tighten the interface again; if there is still water leakage, contact after - sales to check the sealing of the valve core and valve body.

 

Q2: The angle valve switch becomes very difficult to operate. How to solve it?
A2: Usually, it is caused by the accumulation of impurities or rust in the valve core. First, close the water valve and try to lightly rotate the valve core to clean the impurities; if it doesn't work, you can contact us to replace the suitable valve core to ensure smooth switching.

 

Q3: Will the angle valve made of zinc alloy have rust problems?
A3: Our angle valve has undergone special surface treatment and has excellent performance in salt spray tests. However, if it is in an extremely humid and highly corrosive environment for a long time (such as a bathroom by the sea without protection ), it may affect the rust - proof property. Under normal daily use, the probability of rust is extremely low, so you can use it with confidence.

 

 

Hot Tags: ziax zinc alloy bathroom angle valve | precise flow control · durable & leak - proof, China ziax zinc alloy bathroom angle valve | precise flow control · durable & leak - proof manufacturers, suppliers, factory

Send Inquiry