RDZ163H-200 Rotary Damper Set
20 mm · 1.0–3.5 N·m · 0°–110°
PA66+50%GF shell and shaft with zinc hinge support. The product specification lists more than 50,000 slow-drop cycles and 20,000 high-force tests.
View RDZ163H-200 details →We manufacture and supply rotary dampers for soft-close toilet seat systems to sanitaryware brands, toilet seat factories, importers and OEM buyers. Our model range includes 16 mm, 18 mm, 20 mm and 22 mm options with different torque ranges, shaft profiles and rotation directions. Published examples include RDZ163H-200, A025 and 2038; their specifications apply to the named models only. Match each damper to the hinge cavity, shaft engagement, seat-and-lid load and closing travel before sample approval or bulk production.
A toilet seat rotary damper controls the closing movement of the seat or lid through resistance at the hinge axis. The correct component is selected by the combined seat-and-lid load, hinge geometry, required torque, housing dimensions, shaft connection and rotation direction. A matching outside diameter alone does not confirm compatibility.
Our toilet seat damper range includes model-specific configurations for different hinge systems. Buyers sourcing from a China manufacturer or supplier should compare the actual drawing and sample—not rely on a generic “universal” fit description.
These examples show the range of published sizes and torque specifications. Each value belongs to its named model and should be reconfirmed against the current drawing and sample.
20 mm · 1.0–3.5 N·m · 0°–110°
PA66+50%GF shell and shaft with zinc hinge support. The product specification lists more than 50,000 slow-drop cycles and 20,000 high-force tests.
View RDZ163H-200 details →
20 mm · 1.0–3.5 N·m · 0°–110°
PA66+50%GF housing and shaft for selected PP toilet-seat hinge systems. Confirm the cavity, shaft engagement and CW/CCW direction on the actual assembly.
View A025 details →
22 mm · 1.0–3.0 N·m · 0°–110°
PA66+50%GF shell and shaft for selected UF toilet-seat hinge assemblies. Check the housing seat and shaft profile before confirming a replacement.
View 2038 details →Use this comparison to shortlist a model. The nominal size and torque range are not a substitute for the complete installation drawing or an assembled sample test.
| Model | Listed Size | Torque Range | Model-Specific Notes |
|---|---|---|---|
| RDZ163H-200 | 20 mm | 1.0–3.5 N·m | PA66+50%GF shell and shaft; zinc hinge support; 0°–110° |
| A025 | 20 mm | 1.0–3.5 N·m | Selected PP seat hinge systems; PA66+50%GF housing and shaft |
| 2038 | 22 mm | 1.0–3.0 N·m | Selected UF seat hinge systems; PA66+50%GF shell and shaft |
| 16G | 16 mm | 1.0–3.0 N·m | PA66+50%GF shell; zinc shaft; 0°–110° |
| 20D | 20 mm | 1.0–3.0 N·m | PA66+50%GF shell and shaft; 0°–110° |
A 20 mm model is not automatically interchangeable with another 20 mm model. Confirm the full housing profile, shaft cross-section, engagement depth, locating features and damping direction before approving a substitute.
Provide the seat and lid weights separately when they move independently. Hinge-axis position and the distance to each component’s centre of mass affect the required damping torque.
Check the damper’s nominal diameter, overall length, locating ribs, end flange and available hinge cavity. A single diameter value does not define the full installation envelope.
Compare shaft shape, engagement depth and retaining features. Specify left- and right-side orientation and define the viewing direction when requesting CW or CCW damping.
Confirm the required seat travel, mechanical stops and target closing time. Evaluate the damper on the actual hinge and seat assembly rather than as an isolated component.

A meaningful sample review should connect the damper’s torque and motion to the intended toilet-seat mechanism. Agree on the test fixture, loading, angle, rotation direction, speed, temperature and acceptance criteria before comparing results.
We supply toilet-seat rotary dampers for sanitaryware manufacturers, brands, importers and wholesale buyers. Selected model listings support OEM identification such as tags, labels and logos. The available torque version, component configuration, sample arrangement, packaging and order schedule should be confirmed for the exact model and quantity.
Share the model code, existing damper photos, drawings or a physical sample, plus the target seat and hinge information.
Confirm the housing, shaft, torque, rotation direction and closing performance with the intended assembly.
Confirm quantity, destination country, model identification, packaging, inspection requirements and production schedule.
No. Fit depends on the hinge cavity, shaft interface, engagement depth, rotation direction, seat-and-lid load and required closing travel. Confirm the complete assembly before selecting a replacement or approving a new model.
No. Two 20 mm dampers may have different overall lengths, housing profiles, locating features, shaft shapes or engagement depths. Compare the dimensioned drawings and test the candidate in the intended hinge.
Start with the seat and lid weights, hinge-axis position, lever arm, opening angle and target closing time. The final torque should be confirmed through a sample test on the actual assembly; seat material alone is not enough to determine torque.
A025 is listed as a 20 mm, 1.0–3.5 N·m damper for selected PP seat hinge systems. Model 2038 is listed as a 22 mm, 1.0–3.0 N·m damper for selected UF seat hinge systems. Their different nominal sizes and application references do not establish interchangeability.
Rotation direction is model- and hinge-specific. Send a drawing or photo that identifies the left and right hinge positions and the viewing direction, then confirm the required CW or CCW behaviour with the selected sample.
OEM tags, labels and logos are listed for selected damper models. Provide the required artwork, model, order quantity and packaging details so the available options can be confirmed for your order.
Include the model code or reference sample, housing and shaft dimensions, required torque, rotation direction, seat-and-lid weight, hinge drawing, quantity, destination country and any OEM or packaging requirements. Photos of both ends of the existing damper are also useful.
Please include the damper model or sample photo, housing and shaft dimensions, target torque, rotation direction, seat-and-lid weight, hinge drawing, required quantity, destination country and any OEM or packaging requirements.
Get a Damper Recommendation & QuoteWe're professional damper for toliet seat manufacturers and suppliers in China, specialized in providing high quality customized service. We warmly welcome you to wholesale bulk cheap damper for toliet seat from our factory. For price consultation, contact us.
damper, Damping For Toilet Lids, damper for toliet seat