AVA ZF020 Smart Toilet Seat Cover | V-Shaped PP | ZIAX

AVA ZF020 Smart Toilet Seat Cover | V-Shaped PP | ZIAX
Product Introduction:
Multi-clean modes Constant temp comfort Smart induction Safe & waterproof Easy install & fit
Send Inquiry
Add To Inquiry
Description
Technical Parameters
AVA ZF020 · Smart toilet seat cover

AVA ZF020 Smart Toilet Seat Cover – V-Shaped PP with Instant Heating & Soft-Close Lid

AVA ZF020 is a V-shaped smart bidet toilet seat cover made from PP, with stated dimensions of 515 × 370 × 123 mm. Its listed functions include feminine, posterior and oscillating washing, instant warm-water heating, adjustable seat temperature, warm-air drying, nozzle self-cleaning, a seat sensor and a silent soft-close lid. The product is intended for compatible ceramic bowls with suitable water and electrical connections. Buyers should confirm the mounting drawing, regional power version, exact control configuration and supplied accessories before approving a wholesale or OEM order.

AVA ZF020515 × 370 × 123 mmV-shaped PPInstant water heatingSoft-close lid

Compare other specifications in the ZIAX Smart Toilet Seat range, or request a model-specific fit review and quotation.

Request ZF020 Fit Review & Quotation
AVA ZF020 Smart Toilet Seat Cover closed top view with side control panel

AVA ZF020 closed-lid view; the control panel is visible at the left side of the seat.

Specifications & purchase details

AVA ZF020 Product Specifications

The following details describe the ZF020 smart seat configuration. Mounting-interface, electrical and water-supply data must be checked against the approved drawing and technical sheet for the quoted market version.

Specification ZF020 detail
Model AVA ZF020 Smart Toilet Seat Cover
Seat shape V-shaped
Body material PP, described in the product specification as food-grade PP; material grade and component BOM available for order confirmation
Overall dimensions 515 × 370 × 123 mm (L × W × H); exterior dimensions, not fixing-hole spacing
Weight 5 kg with packaging, as listed; final packed net/gross values to be matched to the shipping specification
Washing modes Feminine wash, posterior wash, oscillating wash and enema-assistance mode are listed; exact menu and pressure range to be matched to the sample
Water heating Tankless instant / constant-temperature heating is described; rated heating power, water-temperature range and inlet-water limits to be confirmed
Seat heating Three-level adjustable heated seat is listed; numeric setpoints to be confirmed
Warm-air drying Three-level adjustable warm-air drying is listed; numeric temperature range and airflow configuration to be confirmed
Wash adjustment Water pressure and nozzle/spray-rod position adjustable; number of levels and pressure values to be verified
Nozzle & filter Pre/post-use nozzle self-cleaning, spray-rod sterilization and water filtration are described; sterilization method, filter type and performance require product-specific evidence
Controls Side-mounted control panel shown in the product image; seat sensing and remote operation are described on the page. Confirm delivered interface and remote inclusion for the order.
Comfort / convenience Silent soft-close lid and LED night light
Safety features IPX4 and leakage protection are stated on the source specification; request corresponding model/version test documents
Rated electrical supply Voltage, frequency, rated input, power-cord length, plug type and ground/protection requirements are to be specified for the destination market
Water inlet / pressure Connector thread, hose/inlet arrangement and min/max working pressure to be confirmed against the model installation drawing
Mounting / ceramic fit Fixing-hole spacing, bracket adjustment range, rear clearance and top/bottom-fixing access require confirmation; exterior size alone is insufficient
Included accessories Mounting hardware and an installation manual are described; verify hose, filter, controller/remote, fasteners and spare parts on the approved packing list
Color / OEM White product shown; private-label logo, labels and packaging may be evaluated for order-specific feasibility
Packing Unit box dimensions, cartons per shipment, pieces per carton and gross/net weight to be specified on a validated packing list

For procurement: request the product drawing, actual mounting-hole range, rated electrical label, waterway information and approved accessory list with the sample. These documents determine whether the quoted model matches the intended installation and market.

Dimensions & installation fit

Check the Ceramic Bowl Before Ordering ZF020

The ZF020 outline measures 515 mm long, 370 mm wide and 123 mm high. The exterior drawing does not establish the mounting-hole geometry, and a V-shaped profile is not proof that the product fits every V-shaped or oval ceramic toilet.

  • Bowl length: measure from the centers of the seat fixing holes to the front edge of the ceramic rim.
  • Bowl width: measure the widest part of the ceramic seat-contact area.
  • Fixing holes: provide center-to-center spacing, hole diameter and whether top or bottom access is available.
  • Rear clearance: check cistern, wall, bidet housing, lid travel and service access.
  • Water and power: identify water valve/inlet position, pipe route, accessible electrical outlet and local electrical requirements.

Read the toilet seat measurement guide and the U-, V- and O-shaped seat compatibility guide before sharing your fit data.

AVA ZF020 Smart Toilet Seat Cover dimensional drawing 515 mm length 370 mm width 123 mm height

ZF020 supplied product drawing showing the exterior length, width and rear height.

When ZF020 may not be suitable

A bowl with an incompatible rim outline or fixing-hole pattern, insufficient space behind the seat, inaccessible mounting hardware, unsuitable water connections, inadequate water pressure or an electrical supply that does not match the approved model version may require a different seat. Send a bowl drawing or dimensioned photographs for review before sample or bulk approval.

Washing & comfort

Washing, Heated Seat, Drying and Everyday Controls

ZF020 is described as a multi-function electronic seat, rather than a conventional non-electronic PP seat. For importers and OEM buyers, the selected operating functions should be checked on the same production-reference sample used for dimensions and electrical approval.

Water cleansing

Posterior & feminine wash

Dedicated wash modes with adjustable water pressure are listed. Confirm the nozzle movement, pressure steps and user controls on the approved configuration.

Spray movement

Oscillating wash

A moving-spray mode is described together with adjustable nozzle position. Verify travel and operating settings in the product demonstration.

Warm water

Instant heating

A tankless constant-temperature water heating function is listed. Confirm the rated power and temperature behavior under the site's actual inlet-water conditions.

Seat comfort

Three-level heating

The seat is listed with three selectable heating levels; final setpoints are tied to the electrical version and product specification.

Drying

Warm-air function

Warm-air drying with three selectable levels is included in the feature description. Confirm dryer control and protective behavior on the sample.

Controls & closure

Sensor and soft-close

Seat sensing, an LED night light and a controlled soft-close lid are listed. The page also describes remote use; verify the exact supplied control device and language.

The term "enema assistance" appears as a wash-mode name in the ZF020 source information. It should not be interpreted as a medical treatment or supported by health claims without separate evidence.

For user-operation background, see how to adjust bidet water temperature.

Installation & utilities

Electrical, Waterway and Installation Requirements

Because the ZF020 combines electricity, water and a ceramic mounting interface, installation approval should cover these systems together-not only the shape of the seat.

01

Power supply: match the model nameplate to the destination voltage, frequency, plug and applicable circuit protection.

02

Water line: confirm inlet connector, hose route, minimum/maximum pressure and accessible shutoff valve.

03

Mounting: compare bowl hole centers, bracket adjustment, rear housing and lid movement with the fitting drawing.

04

Commissioning: follow the approved manual and local rules; function-test the seat, dryer, spray, sensors and protective features.

Keep clearance for hose routing and cleaning access. Use qualified tradespeople where local plumbing or electrical requirements call for them.

AVA ZF020 Smart Toilet Seat Cover second closed-lid product view with side controls

Additional ZF020 product image showing the closed lid and side-control area; check installation details against the drawing, not the photograph alone.

Nozzle maintenance & safe use

Self-Cleaning Nozzle, Water Filter and Protection

The ZF020 product information lists pre- and post-use nozzle self-cleaning, spray-rod sterilization, a water filter, IPX4 splash protection and leakage protection. The exact sterilization method, antimicrobial efficacy, filtration performance and electrical protection specifications should be supplied with the matching technical or test documents rather than inferred from a feature name.

Nozzle

Self-cleaning cycle

Review the pre- and post-use cycle and approved cleaning procedure in the user manual. Use mild, non-abrasive surface cleaning.

Consumables

Replaceable water filter

Agree the filter type, part number, replacement instructions, service interval and availability of spare units for the destination market.

Splash & leakage

Documented protection

IPX4 and electrical leakage protection are listed. Obtain version-specific test reports, ratings and instructions before making product conformity claims.

Product safety documentation

For electrically equipped toilet seats, IEC 60335-2-84:2019 is a useful toilet-appliance electrical-safety reference, while IEC 60529 defines the enclosure IP-code framework. These references do not constitute ZF020 certification. Required declarations, test reports and labeling depend on the exact product version and destination market.

Model selection

ZF020 Standard vs. ZF020 Premium: Confirm the Actual Feature Package

Both ZF020 listings use a V-shaped design and the same overall dimensions. The standard ZF020 listing emphasizes multi-mode washing, tankless heating, three-level comfort settings, a seat sensor and a soft-close lid. The separate premium listing additionally describes Bubble Hygiene Shield and automatic lid operation. Buyers should select between these configurations using a confirmed function list, BOM, control specification and sample-not the shared model number alone.

Comparison point What to verify for the standard ZF020 order
Overall profile V-shaped; 515 × 370 × 123 mm listed. Confirm whether standard and premium share the same mounting drawing.
Washing / heating Multi-mode washing, instant heating, heated seat and warm-air drying are listed for standard ZF020.
Lid mechanism Soft-close lid is listed for standard ZF020. Automatic lid is described on the premium listing; do not assume it is supplied on the standard order.
Bubble feature Bubble Hygiene Shield is described on the premium listing, not established as part of the standard order.
Control equipment A side controller is visible on standard ZF020 imagery; confirm which remote or control interface, if any, is included in the quoted box.

See the AVA ZF020 Premium Smart Bidet Toilet Seat for the separate premium product listing, and our basic vs. premium bidet seat guide for broader selection criteria.

China manufacturer · OEM procurement

OEM Supply, Assembly Checks and Product Documentation

ZIAX supports toilet-seat sourcing from China. For the standard AVA ZF020, the manufacturer discussion should begin with one approved configuration: exact body material, electrical/waterway version, mounting dimensions and enabled functions.

As a supplier, ZIAX can review private-label requirements such as logo placement, labels, translated instructions and packaging with the purchase specification. Any changes to colors, tooling, controls, electronic functions or waterway components require technical feasibility and sample approval.

Factory QC items for a standard ZF020 order

  • Incoming: check approved PP components, electronics, seals, hose, hardware and filter against the BOM.
  • Dimensions: verify housing size, mounting interface, closing movement and clearances against the agreed drawing.
  • Function: inspect water delivery, washing modes, seat heating, water heating, drying, controls and sensing.
  • Protection: perform agreed leakage, electrical and functional-safety checks; validate any IP or conformity claim by scope-specific evidence.
  • Pre-shipment: check manuals, branding, accessories, serial/rating labels, carton protection and approved packing data.
ZIAX China sanitaryware manufacturing workshop and toilet seat production equipment

ZIAX manufacturing workshop. Model-specific ZF020 electrical and functional test records should be reviewed separately for the supplied configuration.

OEM document package: approved sample and function matrix, technical drawing, model nameplate, waterway/electrical specifications, installation manual, applicable conformity/test evidence, artwork, accessory list, packing specification and agreed inspection checklist.

Related models & fit resources

Compare Smart Seat Models and Installation Guides

Parent category

Smart Toilet Seat Range

Browse different smart-seat profiles, controls and feature configurations.

Premium configuration

AVA ZF020 Premium

Compare listed bubble hygiene and automatic-lid functions against your requirements.

V-shaped alternative

AVA ZF018

Another V-profile option; compare its 515 × 370 × 122 mm exterior drawing and functions independently.

U-shaped alternative

AVA ZF019

Review a U-shaped smart bidet profile where the bowl outline differs.

Premium alternative

ZF015 Premium

Review a separate premium seat configuration before final model selection.

Seat hub

All Toilet Seats

Compare electronic and non-electronic seats by material, seat geometry and application.

Fixing guide

Hinge & Cleaning Access

Understand how hinge and fixing selection affects access and routine maintenance.

Hinge components

Toilet Seat Hinge Sets

Related hinge solutions for conventional seats; not confirmed ZF020 spare components.

Damper components

Rotary Dampers

Explore soft-close mechanism design; replacement compatibility is model-specific.

Product FAQ

AVA ZF020 Smart Toilet Seat Cover FAQ

What is the AVA ZF020 made from, and what is its size?

AVA ZF020 is a V-shaped PP smart toilet seat cover with published overall dimensions of 515 × 370 × 123 mm. The fixing-hole spacing is not the same as the exterior dimensions and should be checked separately on the installation drawing.

Will AVA ZF020 fit my ceramic toilet bowl?

Fit is not universal. Send the bowl length, maximum width, center-to-center fixing-hole distance, hole diameter, rear housing clearance and mounting-access details. Also provide a top-view photo or ceramic drawing for review.

Which washing, heating and drying functions are included?

The ZF020 listing includes feminine, posterior and oscillating washing, adjustable water pressure and nozzle positioning, tankless warm-water heating, three-level seat heating and three-level warm-air drying. The exact control menu and setpoints should be verified on the approved sample.

How does ZF020 differ from the ZF020 Premium listing?

The standard listing describes a soft-close lid and the principal washing/heating/drying functions. The separate premium listing also describes automatic lid operation and Bubble Hygiene Shield. Both use the ZF020 name and similar exterior dimensions; request a written function matrix and BOM before treating them as distinct configurations.

What power supply and water connection does ZF020 need?

Confirm the voltage, frequency, rated power, plug and electrical protection on the destination-market nameplate. The inlet connector, water-pressure range and hose arrangement should be verified using the ZF020 waterway and installation specifications.

Are a remote, filter, hose and mounting parts included?

The product information refers to a remote, a filter and mounting hardware, and its image shows a side controller. Confirm the actual controls, hose, brackets, filter, manual and other accessories against the approved quotation and packing list.

Can ZF020 be supplied with OEM branding, and what documents are available?

Send quantity, destination, logo artwork, label language and packaging requirements for feasibility review. Request the approved product drawing, electrical/waterway specification, test reports covering the exact version, warranty terms and the production lead time in the final quotation.

RFQ · AVA ZF020

Request a ZF020 Sample, Fit Check or OEM Quote

To confirm the correct smart-seat configuration, please share your model, order quantity, destination country, ceramic toilet dimensions or drawing, fixing-hole spacing, water connection, local electrical supply and OEM requirements. This allows fit, functions, documentation, accessories and commercial terms to be reviewed together.

  • Model: AVA ZF020 Smart Toilet Seat Cover; required quantity and shipment destination
  • Ceramic bowl photo/drawing; bowl length, width, fixing-hole centers and rear clearance
  • Water inlet position, connector type and operating pressure
  • Voltage/frequency, plug type and required conformity documents
  • Preferred wash/heating/drying functions and control interface
  • Logo, color, manual language, carton artwork and spare-part needs

 

Hot Tags: AVA ZF020 smart bidet toilet seat, V-shaped smart toilet seat,PP smart bidet seat, instant heating toilet seat, heated toilet seat with warm-air dryer, smart toilet seat cover manufacturer, China smart toilet seat supplier, smart bidet seat OEM factory

Send Inquiry