Stainless Steel Toilet Seat Hinge | Ziax HSA020ZS

Stainless Steel Toilet Seat Hinge | Ziax HSA020ZS
Product Introduction:
HSA020ZS toilet seat hinge made from 304 stainless steel with a polished finish and complete mounting hardware. 100 mm standard length, OEM/ODM customization available.
Send Inquiry
Add To Inquiry
Description
Technical Parameters
Model HSA020ZS

Adjustable SS304 Toilet Seat Hinge for Dimension-Controlled Fit

HSA020ZS is an adjustable toilet seat hinge with a 55 mm base and a 130–180 mm adjustment range. The hinge body and pin cover are made from SS304, while the fixing nut combines rubber with a brass insert. M5, M6 and 1/4 in. thread options allow the fixing specification to be matched to the approved toilet seat and bowl configuration.

55 mm Hinge base diameter
130–180 mm Adjustment range
SS304 Hinge body and pin cover
NSS 180 h Specified salt spray test
HSA020ZS1
 
HSA020ZS
 
HSA020ZS2
 

HSA020ZS Technical Specifications

Specification HSA020ZS Details
Model No. HSA020ZS
Product Type Toilet seat hinge
Base Diameter 55 mm
Hinge Body SS304
Pin Cover SS304
Nut Rubber with brass insert
Screw Thread M5 / M6 / 1/4 in.
Adjustment Range 130–180 mm
Salt Spray Test NSS 180 h
Components Hinge body, screws, washers and nut
Working Temperature -20°C to +80°C
MOQ 5,000 sets
Delivery Time 25 days
Customization Customize according to customer drawings
HSA020ZS2

SS304 hinge components with rubber nuts and brass inserts.

Confirm the selected thread, bowl mounting-hole dimensions, seat-side hinge interface and required adjustment position before approving a bulk order.

Key Features for Toilet Seat Hinge Sourcing

01

SS304 Hinge Body and Pin Cover

The specified hinge body and pin cover use SS304, giving buyers a defined stainless-steel material specification for the metal hinge components.

02

130–180 mm Adjustment Range

The adjustable hinge-center range provides 50 mm of positioning flexibility. The target fixing-hole centers should remain within this range after the toilet seat is correctly centered on the bowl.

03

Multiple Thread Options

M5, M6 and 1/4 in. thread specifications are available for matching different approved fixing configurations. The required thread should be identified before order confirmation.

04

Rubber Nut with Brass Insert

The fixing nut uses a rubber body with a brass insert. Buyers should confirm the mounting-hole diameter and nut geometry to make sure the fixing components match the target ceramic bowl.

What to Confirm Before Ordering HSA020ZS

An adjustable toilet seat hinge still has a defined fitting range. Compatibility should be approved from measurements and drawings rather than product appearance alone.

Matching Item What to Confirm Why It Matters
Fixing-hole centers Measure the center-to-center distance on the target bowl. The required position must stay within the 130–180 mm adjustment range.
Mounting-hole diameter Check the ceramic holes against the selected rubber nut. An incorrect hole-to-nut match can prevent secure fixing.
Thread specification Specify M5, M6 or 1/4 in. for the approved configuration. The screw and mating fixing components must use the same specification.
Base clearance Check available rear-seat and bowl space for the 55 mm base. Correct clearance supports seat alignment and prevents interference.
Seat-side interface Send the toilet seat drawing, hinge interface dimensions or a reference sample. Bowl-hole compatibility alone does not confirm the seat-side connection.
Closing function State whether the finished seat requires standard closing or a separate soft-close system. Soft-close performance depends on the complete hinge, damper and seat interface.

Fit Approval Before Mass Production

01

Measure the Bowl

Record the fixing-hole centers, mounting-hole diameter and available clearance around the hinge area.

02

Define the Fixing Set

Select the required M5, M6 or 1/4 in. thread and confirm the matching rubber nut and washer arrangement.

03

Check Seat Alignment

Position the hinge within its adjustment range and verify that the seat is centered with correct rear and bumper contact.

04

Freeze the Approved Drawing

Confirm material, dimensions, fixing components and interface details before the specification is released for bulk production.

Salt Spray, Temperature and Order Specifications

HSA020ZS combines defined material, test and commercial specifications so buyers can include the hinge in a controlled toilet-seat BOM and purchasing specification.

Salt Spray Test NSS 180 h
Working Temperature -20°C to +80°C
MOQ 5,000 sets
Delivery Time 25 days

NSS identifies the specified neutral salt spray test duration. If your project has a separate acceptance criterion, cleaning-chemical requirement or market-specific test requirement, include it in the purchase specification before production approval.

OEM Toilet Seat Hinge Customization

We can customize HSA020ZS according to customer drawings. For a model-specific toilet seat or private-label program, send controlled dimensions so the hinge base, adjustment position, fixing hardware and seat-side interface can be reviewed against the intended assembly.

  • Toilet seat and ceramic bowl drawings or reference samples
  • Center-to-center distance between the bowl fixing holes
  • Mounting-hole diameter and available hinge clearance
  • Required M5, M6 or 1/4 in. thread specification
  • Seat-side hinge interface and rear seat geometry
  • Required quantity, destination country and packaging needs

Related Toilet Seat Components and Selection Resources

HSA020ZS Toilet Seat Hinge FAQ

What materials are used in the HSA020ZS toilet seat hinge? +

The hinge body and pin cover are SS304. The fixing nut uses rubber with a brass insert.

What is the adjustment range of HSA020ZS? +

The specified adjustment range is 130–180 mm. Measure the target bowl fixing-hole centers and confirm the final seat position before approval.

Which screw thread specifications are available? +

HSA020ZS is specified with M5, M6 and 1/4 in. thread options. Confirm the required thread together with the mating fixing components before ordering.

Does an adjustable HSA020ZS hinge fit every toilet seat? +

No. Compatibility also depends on the bowl fixing-hole diameter, seat-side hinge interface, 55 mm base clearance, fixing hardware and seat geometry. A drawing or fitted reference sample is recommended for model-specific sourcing.

What does the NSS 180 h specification mean? +

The HSA020ZS specification includes an NSS neutral salt spray test duration of 180 hours. If your project requires a specific appearance or corrosion acceptance criterion after testing, include that requirement in the approved specification.

Can HSA020ZS be customized for an OEM toilet seat? +

Yes. We can customize according to customer drawings. Send the seat and bowl dimensions, required thread, hinge interface, quantity and any packaging requirements for project review.

What are the MOQ and delivery time for HSA020ZS? +

The specified MOQ is 5,000 sets and the listed delivery time is 25 days. Final order details should be confirmed together with the approved product specification.

Send Your Dimensions for HSA020ZS Hinge Matching

Please include the bowl fixing-hole centers, mounting-hole diameter, required M5, M6 or 1/4 in. thread, seat-side hinge drawing, quantity, destination country, and any OEM or packaging requirements.

Get HSA020ZS Matching & Quote

 

Hot Tags: Stainless Steel Toilet Seat Hinge | Ziax HSA020ZS, China Stainless Steel Toilet Seat Hinge | Ziax HSA020ZS manufacturers, suppliers, factory

Send Inquiry